Skip to content

What’s The Difference Between Brad Nailers and Finish Nailers?

Brad nailers and finish nailers are used in carpentry. Both are oriented on the surface of wood materials through the use of air compressor powered nail guns. Most of the time, brad nails are commonly known as finish nailer or finishing nails because of their size are not really much different. A brad nail is second-to-the-smallest nails can be used in a nail gun. It has a gauge or thickness of 1.22 mm diameter 18, while nail finishing measure 15 and 16, with a diameter of 1.63 corresponding to 1.83mm, respectively. With the difference in size and length to the differences in use or its functions.

 

Brad Nailers and Finish Nailers

Difference Between Brad Nailers and Finish Nailers

Carpentry

 

Brad nails are often used in decorative wood where carpenter working on doors, casings, or berms; and finish nails used in wood finish or detail, where the carpenter works on a wood storage cabinets and containers. This is because most of the brad nails with flat head can be seen on the wood; nail head finishs that are barely noticeable and can be redrawn as a final touch. Finish nails are usually stronger push for their sharp finish, so their heads are usually sunk or sinking into the wood.

 

Holding Woods Together

 

Brad nails are also used to repair wood in place or keep the two pieces together and can be removed carefully between two pieces of wood when the glue dried up. Finish nails, on the other hand, and as a “headless”, is only used as the last nail to be driven into the detailed joinery work.

 

Corners and Central Spots

 

Many carpenters use brad nails for securing the corners or near the corners of the timber. Brad nails are less likely to split the wood or ruin the corners, with about 70 to 80 percent probability, compared with finish nailers which are almost always certain to damage the wood corner. This is because there blunt brad nails, while the nails more pointed finish – making them easier to drive, and always make them farewell with wood corner impacts.

 

Project

 

Other carpenters used their classification depfinishing on the type of projects they implemented because brad nails and finishs nail different of the length and streng. For small projects like tacking plywood together or smaller woodworking, where the head will not be a problem, use brad nails. For large projects, such as cabinets or closets or even outdoor furniture, use nail finishs.

 

Hardwood and soft wood

 

Some carpenters use wood brad nails softer as they are very thin, while others use them for hardwoods. Brad nail, although with a smaller diameter thin finish nailers, and is often shorter. The length of the nails from 5/8 inch brad change to 2 inches, while a finish nails range from 5/8 inch to 2.5 inch. Finish nails are used for driving on difficult materials, but they can be used for soft materials because they will be the first fully embedded and negligible when repainting.

 

Please click here to know more details about brad nailer at amazon.com

COMMENT ON: What’s The Difference Between Brad Nailers and Finish Nailers?

Leave a Reply

Your email address will not be published. Required fields are marked *